Description

• • Demonfx Gravity guitar effects pedal Overdrive TS10 And K-C in one pedal

    Gravity is our take on two all-time favorite overdrive circuits, the Klon Centaur-style circuit and a TS10 circuit all in one enclosure! A new dual overdrive specializing in mid push, Gravity will give you the ability to cut through the mix in any situation.

    The inspiration for this pedal lies in its name, Gravity and also by the later live lead tones of John Mayer. In particular the outro solo tone in his song “Gravity”, and intro in his song “Belief”, where he stacks these two pedals to obtain that signature tone with a thick wall of mids. The TS10 is often used as the main lead tone and the K-overdrive is added as a second cascading gain stage, either as a pre drive into the TS10, or as a post drive.

    We have recreated the circuits in each pedal staying true to the original, but added switching options for additional tone shaping.  We have kept both buffers that were used in the original designs in order to replicate the exact interaction between the two circuits.  The Gravity overdrive is divided into a side A (left) and a side B (right), separated by the order toggle switch in the middle which is used to flip the internal order of the effects and hence the signal path from guitar to amp.

    Side A features the TS10 circuit with external knobs for DRIVE, TONE, LEVEL and a two position toggle switch labeled LOWS. The lows switch changes the bass response of the circuit.

    The side B features the Klon Centaur-circuit with external knobs for GAIN, TREBLE, OUTPUT and a two position toggle switch labeled CLIPPING. The clipping switch toggles between a pair of germanium or schottky clipping diodes.

    Both sides can be used separately or stacked.

    TRS split: Besides using the two sides of Gravity in serial mode, either A->B or A<-B,

    PLEASE NOTE THAT THE EXTERNAL ORDER TOGGLE SWITCH MUST BE IN UP POSITION A <- B

    Features:

    Side A (left)

    – Replica of the TS10 audio circuit including the three transistor buffer circuit.

     – RC4558 Operational Amplifier

     – External two position lows toggle switch for extended low frequency response

     – Original Toshiba 1s1588 silicon diodes as in the original TS10 JP

    Side B (Right)

    – Replica of the Klon CENTAUR-circuit.

    – External two position Clipping switch to choose between a pair of Germanium – or a pair of Schottky clipping diodes.

    – The germanium diodes we use are NOS original russian NOS D9B.

    External ORDER switch to choose in which order the signal passes through the two circuits.

    The Gravity overdrive is built using carefully selected top shelf components:

    – VISHAY 1% metalfilm resistors

    – WIMA MKP10, MKS4 and FKP2 film capacitors – no electrolytes in the audio circuit.

    – VIMEX sealed potentiometers

    – TAIWAY toggle switches

    – PURE TONE MULTI-CONTACT 1/4″ JACK

    – Dimension: 115 mm x 95 mm x 35 mm

    -Power Supply: DC9V100MA,tip negative polarity

    POWER:

    The Gravity requires a regulated 9-volt DC power supply with standard 2.1mm jack tip negative polarity.

    The max power consumption of the Gravity is 100mA (+9VDC).

    If operated with a power supply with insufficient current capabilities, it will affect the performance.

    So make sure your +9V-DC power supply is capable of delivering 100mA.

    We recommend you to use a quality power supply with isolated outputs.

  Note:
  Power supply not included.
  Please use a 9V DC power adapter whose polarity is negative center otherwise, the product may not work properly.Package List:
  1 * Effect Pedal

  1 * User Manual ( English )

• 1 * Year warranty through our store
  
  

*Just to be clear on DUTY, (regardless of any warnings to buyers  ) Canada and the USA have a trade agreement in place that allows US citizens to purchase/import up to $800 dollars per purchase in to the United States from Canada with NO Duty at all, on OUR site NO State taxes either.

Payments