Fanmuzk Rome Warrior Bass Preamp Pedal 6-Band Graphic EQ Headphone Out AUX In True Bypass Designed by DemonFx

Fanmuzk Rome Warrior Bass Preamp Pedal 6-Band Graphic EQ With Headphone Out And Aux-In

Blend: Mixes the clean and processed signals. The clean signal remains at unity gain while the volume of the overdriven signal is set by the Level knob, allowing for fine mix tuning.

Level: Sets the volume of the overdriven signal.

Drive: Sets the amount of gain in the overdriven signal.

Bite: Boosts High Mids (2.8kHz) for additional presence and definition.

Growl: Shelving Bass Boost for a fatter tone and increased low end saturation.

Mod: Selects or mixes between the two distinct distortion circuits: Alpha is punchy, tight with a lot of definition, whereas Omega is simply brutal and raw. On the Darkglass Suite you can assign footswitch control of the Mod to toggle between Alpha and Omega.

Master: Whereas the Level knob control the output of the overdrive section the Master volume adjusts the overall volume of the unit. Ideal for fine tuning the output on clean mode. It also serves as a DI and headphone volume control. Please note that volume is not affected by this control when the pedal is on bypass.

Bass: Low shelf +-12dB @ 80 Hz

Mid bands: +-10dB @ 250 Hz, 500 Hz, 1.5 kHz, 3 kHz

Treble: High shelf +-12dB @ 5 kHz

Every effect pedal has been tested carefully before delivery, it’ll never let you down.

Input Impedance: 500kΩ

Output Impedance: 1kΩ

•    Dimensions (W/D/H): 120 mm X 95mm X 50mm

•    Weight: 0.6 lbs. (490g)

•    Power Consumption: 9VDC/120 mA

•   AC Adapter : 9VDC,  (not included)

Note: Power Adapter is not included.

Please use the quality standard 9V effects power adapter whose polarity is negative center, otherwise, the product may not work properly.

The power source is important. Please use a quality power source or brand power adapter. Poor power adapter will make effects noises.